Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

  • 1 Dry time and energy consumption calculated for Max mode. Dry time was determined using Dyson test method 769 based on NSF P335 to a measurement of 0.1 g residual moisture.
  • 2 LED-life calculation is based on L70 measurement according to IEC 62717, with an estimation of 8 hours' usage per day. Real-life results may vary.
  • 3 As per the Illuminating Engineering Society's (IES) The Lighting Handbook, Tenth Edition: Reference and Application, Publisher: Illuminating Engineering Society; 10 edition (July 30, 2011).
  • 4 Particles as small as 0.1 microns. Tested to EN1822. Gaseous capture rates vary.
  • 5 Applies in Eco mode when using a non-motorised tool.
  • 6 Stated runtime applies in suction mode 1 with a non-motorised tool attached.
  • 7 Independently tested on real hair against top 20 best-selling hairdryers. December 2018.
  • 8 LED-life calculation is based on L70 measurement according to IEC 62717, with an estimation of 8 hours' usage per day. Real-life results may vary.
  • 9 Suction tested to EN IEC62885-4 CL5.8 and CL5.9, tested at the flexible inlet, loaded to bin full, in Boost mode against the cord-free stick market. (Sales data from Apr 2020 to Mar 2021).
  • 10 Laser engineered for hard floors. Effectiveness of laser influenced by ambient light conditions, debris type and surface.
  • 11 Best accuracy achieved in Auto mode. Auto ramp feature in Auto mode only. Testing based on average in home usage according to Dyson internal test data. Microscopic dust is defined as particles less than 100 microns.
  • 12 Applies in Eco mode with non-motorised tool. Actual run time will vary based on power mode, floor type and/or attachments used.
  • 13 Tested for purification coverage in an 81m³ room.
  • 14 Particle challenge by DEHS oil specified in EN1822 within a chamber specified in ASTM F3150. Tested in Max Mode at IBR US, for whole machine efficiency above 99.95%.
  • 15 Third party full machine testing based on GB/T 18801-2015 formaldehyde cumulative clean mass testing with continuous injection until plateau of formaldehyde CADR is achieved. Results may vary in practice.
  • 16 Whole machine tested by independent third-party laboratory Airmid (Ireland) in 28.5m³ test chamber pre-conditioned to 20±3C and RH 50±5%. Influenza A (H1N1) aerosolised in the test chamber and airborne concentration observed for the duration of 60 minutes under maximum Fan speed. Achieved 99% efficacy but real life efficacy may differ depending on actual environment and Fan speed. Tested on Influenza A (H1N1) only.
  • 17 Tested for purification coverage in an 81m³ room and heating performance in a 35m³ room.