Let's get your machine working
Dyson Cinetic Animal™Let's get your machine working
Dyson Cinetic Animal™
-
-
Cleaning the bin and cyclone
-
More help required
-
Troubleshooting
-
Pick up issue
-
Strong suction
-
Dual mode floor tool
-
Issue resolved
-
Check duct, bin and cyclone
-
Check for blockages - video
-
Check blockages - step by step
-
Check duct, bin and cyclone
-
Issue not resolved, speak to our Customer Support Team
-
Replacement part required
-
Musclehead check
-
Check floor tool for blockage
-
Replacement part required
-
Turbine head check
-
Check floor tool for blockage
-
Replacement part required
-
Check for blockages - video
-
Power or electrical issue
-
Issue not resolved, speak to our Customer Support Team
-
No power
-
Less than two hours
-
Check for blockages - video
-
More than two hours
-
Issue not resolved, please speak to our Customer Support Team
-
Unusual noise
-
Issue not resolved, speak to our Customer Support Team
-
Rattle noise
-
Check the hose and seals
-
Unusual smell
-
Issue not resolved, speak to our Customer Support Team
-
Check for blockages - video
-
Visible issue
-
Brush bar not spinning
-
Check for blockages - video
-
Clean the bin and cyclone
-
Replacement part required
-
Check blockages - step by step
-
Cable won't rewind
-
Part broken
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Replacement part required
-
Issue not resolved, please speak to our Customer Support Team
-
Replacement part required
-
Issue not resolved, please speak to our Customer Support Team
-
Machine spitting out dust
-
Assembling your Dyson machine
-
Assembling your Dyson machine
-
Storing your Dyson machine
-
Using the cable
-
Serial number location
-
User guide
-
How to attach the accessories
-
Using suction release trigger
-
Using the extension tube
-
How to use the floor tool
-
Dual mode floor tool
-
Musclehead floor tool
-
Turbine head
-
Debris stuck around the shroud
-
Emptying the bin
-
User guide
-
We need a little more information to help us solve your issue.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
You might need a replacement part.
It looks like the Turbine head is not working. You can solve this by ordering a new one below.
Turbine head
Part no. 963544-01
Replacement turbine head for your Dyson vacuum cleaner.
€73.80
Turbine head
Part no. 963544-01
Replacement turbine head for your Dyson vacuum cleaner.
€73.80
You might need a replacement part.
It looks like the Brush bar is not working. You can solve this by ordering a new one below.
Brush bar
Part no. 963549-01
Replacement brush bar for your Dyson vacuum cleaner.
€35.67
Brush bar
Part no. 963549-01
Replacement brush bar for your Dyson vacuum cleaner.
€35.67
€35.67
Please call us to resolve this problem.
It looks like the Combination tool isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Combination tool
Part no. 918068-02
Two tools in one, for versatile cleaning around the home.
€27.50
Combination tool
Part no. 918068-02
Two tools in one, for versatile cleaning around the home.
€27.50
Please call us to resolve this problem.
It looks like the Cyclone isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Cyclone
Part no. 948638-01
Replacement cyclone for your Dyson vacuum cleaner.
€92.25
Cyclone
Part no. 948638-01
Replacement cyclone for your Dyson vacuum cleaner.
€92.25
Please call us to resolve this problem.
It looks like the Dual-mode floor tool isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Dual-mode floor tool
Part no. 966247-03
Adjustable floor tool for optimum suction across all floor surfaces.
€33.82
Dual-mode floor tool
Part no. 966247-03
Adjustable floor tool for optimum suction across all floor surfaces.
€33.82
You might need a replacement part.
It looks like the End Cap is not working. You can solve this by ordering a new one below.
End Cap
Part no. 964597-01
Replacement end cap for your Dyson vacuum cleaner.
€3.08
End Cap
Part no. 964597-01
Replacement end cap for your Dyson vacuum cleaner.
€3.08
You might need a replacement part.
It looks like the Extension tube is not working. You can solve this by ordering a new one below.
Extension tube
Part no. 917260-09
Combines with other Dyson tools to provide a longer reach.
€33.82
Extension tube
Part no. 917260-09
Combines with other Dyson tools to provide a longer reach.
€33.82
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
Please call us to resolve this problem.
It looks like the Musclehead floor tool isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Musclehead floor tool
Part no. 965577-01
Ultra-low profile head, for cleaning under furniture. Self-adjusts to seal in suction across all floor types.
€60.27
Musclehead floor tool
Part no. 965577-01
Ultra-low profile head, for cleaning under furniture. Self-adjusts to seal in suction across all floor types.
€60.27
Please call us to resolve this problem.
It looks like the Stair tool isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Stair tool
Part no. 914417-01
For vacuuming narrow or difficult-to-reach carpeted areas, such as stairs and corners.
€27.50
Stair tool
Part no. 914417-01
For vacuuming narrow or difficult-to-reach carpeted areas, such as stairs and corners.
€27.50
You might need a replacement part.
It looks like the Turbine head is not working. You can solve this by ordering a new one below.
Turbine head
Part no. 963544-01
Replacement turbine head for your Dyson vacuum cleaner.
€73.80
Turbine head
Part no. 963544-01
Replacement turbine head for your Dyson vacuum cleaner.
€73.80
Please call us to resolve this problem.
It looks like the Cyclone isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Cyclone
Part no. 948638-01
Replacement cyclone for your Dyson vacuum cleaner.
€92.25
Cyclone
Part no. 948638-01
Replacement cyclone for your Dyson vacuum cleaner.
€92.25
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
Please call us to resolve this problem.
It looks like the Clear bin isn't working. We know how to fix it – we just can’t do it online.
One of our Dyson experts can help you get the parts or assistance you need.
Clear bin
Part no. 948652-01
Replacement clear bin for your Dyson vacuum cleaner.
€46.12
Clear bin
Part no. 948652-01
Replacement clear bin for your Dyson vacuum cleaner.
€46.12
We need a little more information to help us solve your issue.
But our Customer Support Team will be able to solve your problem.
Please contact our customer service team on 01-475-7109, or directly on Live Chat through our Digital Assistant by clicking the purple icon at the bottom of the page. You can start a conversation with an Expert by clicking the agent icon at the bottom left of the chat window.
Please select the appropriate option
Checking the machine for blockages
Remove the bin from the machine by pressing the bin release catch located to the side of the bin.
Check the openings of the duct and bin for any blockages and remove as necessary.
Empty the bin
Empty the bin and ensure the bin base remains open.
Remove the bin and turn on the machine
When the bin lid is open, a small silver button behind the red opening mechanism should be exposed. Press the silver button.
Separate the cyclone unit from the clear bin.
Cleaning the bin
WARNING: Clean the clear bin with cold water only.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Do not immerse the cyclone in water or pour water into the cyclones.
Ensure the clear bin is completely dry before replacing.
Clean the cyclone
Clean the cyclone shroud with a cloth or the Combination tool to remove lint and dust.
WARNING: Do not use water.
Refit the bin.
Is there anything else we can help you with?
Please select the appropriate option
Please select the appropriate option
Checking the machine for blockages
Remove any tools from the extension tube.
Fully extend the extension tube by pressing the red button.
Turn the machine on and place your hand over the end of the extension tube.
Is the suction strong or weak?
Which floor tool
Dual mode floor tool.
Musclehead floor tool
Turbine head
Which floor tool are you experiencing an issue with?
How to use the floor tool
For use on carpet flooring, the purple seal should be in the 'up' position.
For use on hard flooring, the purple seal should be in the 'down' position.
Check the floor tool for blockages and damage
Fully remove the floor tool from the machine.
Check both inlets for blockages and remove as necessary.
Has checking the bin and cyclone resolved the problem?
Checking the machine for blockages
Please follow the steps in the video.
Has checking for blockages resolved the problem?
Check the extension tube, Wand handle and hose
Separate the extension tube from the Wand handle by pressing the release catch on the Wand handle.
Remove the Wand handle from the hose by pressing the release catch on the hose.
Press the release catch and remove the hose from the appliance.
Check the extension tube, Wand handle and hose for blockages and remove as necessary.
Check the hose inlet
Unscrew the two Phillips screws on the clear bin locator bracket. (Do not remove any other screws.) Remove the bracket.
Firmly twist the flexible inspection hose away from the inlet next.
Inspect for blockages and remove as necessary.
Refit the flexible inspection hose and clear bin locator bracket.
Rebuild and test the machine.
Cleaning the bin and cyclone
Remove the bin from the machine by pressing the bin release catch located to the side of the bin.
Check the openings of the duct and bin for any blockages and remove as necessary.
When the bin lid is open, a small silver button behind the red opening mechanism should be exposed. Press the silver button.
Separate the cyclone unit from the clear bin.
Cleaning the cyclone
Clean the cyclone shroud with a cloth or the Combination tool to remove lint and dust.
WARNING: Do not use water.
WARNING: Do not wash the cyclone.
Reassemble and test machine.
How to use the Musclehead floor tool
The bleed valves can be opened if there is too much suction. If the performance is poor with the bleed valve open, they should be closed again.
Checking the Musclehead for blockages
Remove the Musclehead from the extension tube.
Check the neck and underneath the floor tool and remove any blockages as necessary.
Has checking the floor tool resolved the problem?
The model shown may vary from the product selected but the process remains the same.
Using the Turbine head
The Brush bar on the Turbine head will start spinning as soon as the machine is turned on. You can toggle the Brush bar spin speed by pulling the air release trigger on the Wand handle.
There is no need to turn the Brush bar on and off for different floor types as the floor tool has a row of anti-static carbon fibre filaments to remove fine dust from hard floors, and stiff nylon brushes remove ground-in dirt from carpets. There's no need to turn the Brush bar off when moving from one floor type to another.
Checking the floor tool
Remove the Turbine head from the extension Wand by pressing the release catch.
Use a coin to turn the fastener anti-clockwise and remove the Brush bar.
Remove the Brush bar from the Turbine head.
Clean any hair, thread and debris from the brushbar.
Check the opening of the floor tool for blockages and remove if necessary.
Refit the Brush bar and refit the end cap, turning clockwise to lock.
Refit the brushbar and refit the end cap, turning clockwise to lock.
Has checking the floor tool resolved the problem?
Checking the machine for blockages
Please follow the steps in the video.
Has checking for blockages resolved the problem?
Please select the appropriate option
When did the machine last have power?
Thermal cut out
Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.
Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.
Please select the appropriate option
Checking the machine for blockages
Please follow the steps in the video.
Has checking for blockages resolved the problem?
Check electrical supply
Is the power cord or plug damaged?
Are the other household appliances working?
Does the vacuum work when plugged into another socket?
Please select the appropriate option
Checking for blockages
Please follow the steps in the video.
Has checking for blockages resolved the problem?
Check the hose and seals
Remove the extension tube from the wand handle by pressing the grey switch on the handle.
Check there are no cracks in the handle.
Remove the hose fully from the machine and check there are no rips or tears in the hose.
Remove the bin fully from the machine and check that the inlet on the machine is not damaged.
Check the inlet located on the Main body of the machine, ensure the seal is not torn.
Check the lower duct hose is not torn or twisted.
Remove the clear bin from the cyclone by pressing the silver button at the back of the cyclone.
Attach the hose and bin to the machine ensuring they both click into place.
Turn the machine on.
Please select the appropriate option
Checking the machine for blockages
Please follow the steps in the video.
Has checking for blockages resolved the problem?
Please select the appropriate option
Checking the floor tool
The Brush bar on the Turbine head will start spinning as soon as the machine is turned on. You can toggle the Brush bar spin speed by pulling the air release trigger on the Wand handle.
There is no need to turn the Brush bar on and off for different floor types as the floor tool has a row of anti-static carbon fibre filaments to remove fine dust from hard floors, and stiff nylon brushes remove ground-in dirt from carpets. There's no need to turn the Brush bar off when moving from one floor type to another.
Remove the Turbine head from the extension Wand by pressing the release catch.
Use a coin to turn the fastener anti-clockwise and remove the brushbar.
Remove the Brush bar from the floor tool.
Clean any hair, thread and debris from the brushbar.
Check the opening of the floor tool for blockages and remove if necessary.
Refit the brushbar and refit the end cap, turning clockwise to lock.
Rebuild and test the machine.
Has checking the floor tool resolved the problem?
Checking the machine for blockages
Please follow the steps in the video.
Has checking for blockages resolved the problem?
Cleaning the bin and cyclone
Remove the bin from the machine by pressing the bin release catch located to the side of the bin.
Check the openings of the duct and bin for any blockages and remove as necessary.
When the bin lid is open, a small silver button behind the red opening mechanism should be exposed. Press the silver button.
Separate the cyclone unit from the clear bin.
Cleaning the cyclone
Clean the cyclone shroud with a cloth or the Combination tool to remove lint and dust.
WARNING: Do not use water.
WARNING: Do not wash the cyclone.
Reassemble and test machine.
Check the extension tube, Wand handle and hose
Separate the extension tube from the Wand handle by pressing the release catch on the Wand handle.
Remove the Wand handle from the hose by pressing the release catch on the hose.
Press the release catch and remove the hose from the appliance.
Check the extension tube, Wand handle and hose for blockages and remove as necessary.
Unscrew the two Phillips screws on the clear bin locator bracket. (Do not remove any other screws.) Remove the bracket.
Firmly twist the flexible inspection hose away from the inlet next.
Inspect for blockages and remove as necessary.
Refit the flexible inspection hose and clear bin locator bracket.
Rebuild and test the machine.
Using the cable
Ensure the machine is switched off.
Unplug the machine before rewinding the cable.
If the cable does not rewind, firmly pull it out and fully extend it until the red tape is visible.
The cord rewind button needs to be pressed down firmly to retract the cord for storage after use. When the button is pressed down far enough you should feel and hear a click, and the cord will retract.
Please select the appropriate option
Checking the machine for blockages
Please follow the steps in the video.
Has this resolved the problem?
Please select the appropriate option
Getting started - video
Please follow the steps in the video.
Is there anything else we can help you with?
Using your machine
Attach the hose to the hose inlet on the front of the machine.
Clip the hose to the rear of the handle.
Clip the Wand handle to the extension tube.
Press the release catch on the extension tube to extend fully, ensuring it 'clicks' into place.
Attach the floor tool to the extension tube.
Insert the tools into the holster and attach to the extension tube.
Is there anything else we can help you with?
Storing the tools
Store the Turbine head by inserting it in the clip at the back of the Main body.
Storing the accessories
- Attach the tools to the tool holster.
- Clip the tool holster to the extension tube.
Is there anything else we can help you with?
Hold the plug when rewinding onto cable reel. Do not allow the plug to whip when rewinding.
Using the cable
Turn the machine off.
- Ensure the machine is unplugged.
To retract the cable, press the button firmly until it clicks and the cable rewinds.
Is there anything else we can help you with?
Serial number location
Underneath the machine between the wheels.
Is there anything else we can help you with?
How to attach the accessories
The accessory tools can be attached to the extension tube, Wand handle or hose.
Ensure the click securely into place before use.
Is there anything else we can help you with?
Using the suction release trigger
To reduce the suction pull the release trigger.
Is there anything else we can help you with?
Using the extension tube
Press the release catch on the extension tube to extend fully, ensuring it 'clicks' into place.
Is there anything else we can help you with?
Which floor tool
Dual mode floor tool.
Musclehead floor tool
Turbine head
Which floor tool are you using?
How to use the Dual mode floor tool
Connect the dual mode floor tool to the extension tube. You can adjust the extension tube as you wish using the red catch located on the extension tube.
- With the brushes down, only use on carpets.
- With the brushes down. Use on smooth/hard flooring.
Is there anything else we can help you with?
Using the Musclehead floor tool
The Musclehead will automatically adjust from hard floors to carpets and carpet to hard floors. Therefore it does not need to be manually adjusted for different floor types.
Connect the floor tool to the extension tube, ensuring it clicks into place.
- You can adjust the extension tube as you wish by pressing the red catch on the extension tube.
The bleed valves can be opened if there is too much suction. If the performance is poor with the bleed valve open, they should be closed again.
Is there anything else we can help you with?
Using the Turbine head
There is no need to turn the Brush bar on and off for different floor types, the floor tool has a row of anti-static carbon fibre filaments to remove fine dust from hard floors, and stiff nylon brushes remove ground-in dirt from carpets. There's no need to turn the Brush bar off when moving from one floor type to another.
Connect the Turbine head to the extension tube and ensure the extension tube is fully extended.
To reduce the suction pull the release trigger.
Is there anything else we can help you with?
Clean the bin and cyclone
Debris can become stuck between the shroud and the bin, this could be caused by static or overfilling the bin. Do not fill the bin past the MAX mark.
Remove the bin
When the bin lid is open a small silver button behind the red opening mechanism should be exposed; press the silver button. Separate the cyclone unit from the clear bin.
Cleaning the bin
Clean the clear bin with cold water only.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Do not immerse the cyclone in water or pour water into the cyclones.
Ensure the clear bin is completely dry before replacing.
Clean the cyclone
Clean the cyclone shroud with a cloth or the Combination tool to remove lint and dust.
WARNING: Do not use water.
Refit the bin.
Is there anything else we can help with?
Emptying the bin
Remove the bin from the machine by pressing the bin release catch located to the side of the bin.
Open the bin lid by pressing the red release button on top of the cyclone, be careful to do this somewhere to capture any dust securely.
Cleaning the cyclone
Locate the shroud wiper and pull from its position to remove.
Use the shroud wiper to clean around the cyclone to remove any finer dust.
Check underneath the cyclone for any blockages and remove as necessary.
Do not wash the cyclone.